Product Details
Introduction
Closed-loop sensors measure AC and DC currents and provide electrical isolation. They offer fast response, high linearity, and low emperature drift. The current output of the closed-loop sensor is relatively immune to electrical noise. The Closed- Loop sensor is sometimes called a‘Zero-Flux’sensor because its Hall-Effect sensor feeds back an opposing current into a secondary coil, wound on the magnetic core to zero the flux produced in the magnetic core by the primary current. Closed-loop sensors are often the sensor of choice when high accuracy is essential.
Features
Ø Wide frequency range
Ø Good overall accuracy
Ø Fast response time
Ø Low temperature drift
Ø Excellent linearity
Ø No insertion loss
Application
AC inverters |
DC motor drive static converters |
Communication power supplies |
Uninterruptible power supplies |
Switch power supplies |
Welder power applications |
UPS power supply |
New energy |
Smart transportation |
Chemicals and Machinery |
Electric specifications
|
P/N |
LO-HALL-CT0100 700mA/7V |
In |
Rated Input(AC) |
700mA |
IP |
Testing range |
0.01-700mA |
RM |
Testing resistor |
>10KΩ |
VM |
Rated Output(AC) |
7V |
KN |
Turns Ratio |
----- |
X |
Accuracy(Ta=+25℃) |
5% of standard values |
VC |
Power Voltage |
±12VDC/±15VDC |
VI |
Dielectric voltage |
AC2.5KVA,50Hz,60S |
Vaff |
Offset voltage@25℃ |
When primary current is In=0, <±1mV |
Td |
Temperature drift(-40℃-+85℃) |
0.05%/℃ of VM |
L |
Linearity |
<0.02% |
|
di/dt |
----- |
F |
Frequency range |
50HZ(400HZ) |
Ta |
Operation temperature |
-40℃-+85℃ |
Ts |
Storage temperature |
-40℃-+100℃ |
Ic |
Power loss |
10mA |
Rs |
Secondary resistance@25℃ |
------ |
RN |
Primary resistance@25℃ |
------ |
W |
Weight |
730g |
Schematic Diagram
Mechanical Specifications
http://www.ctsensorducer.com/