Product Details
AC110V 220V To DC 5V 12V 24V Single Output S-35 Series Switching Power Supply
Model
|
S-35-5 |
S-35-12 |
S-35-15 |
S-35-24 |
DC output voltage |
5V |
12V |
15V |
24V |
Output voltage error(Note,2) |
±2% |
±1% |
±1% |
±1% |
Output current rage |
0-7A |
0-3A |
0-2.4A |
0-1.5A |
Wave and noise(Note ,3) |
75mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
Inlet stability(Note ,4) |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
Load stablity (Note ,5) |
±1% |
±0.5% |
±0.5% |
±0.5% |
DC output power |
35W |
36W |
36W |
36W |
Efficiency |
70% |
76% |
78% |
78% |
Adjustable range for DC voltage |
+10,-5% |
+10% |
+10% |
+10% |
AC input voltage range |
85-132VAC/170-264VAC Selected by switch47-63Hz,240-370VDC |
Input current |
0.5A/115V 0.25A/230A |
AC Inrush current |
Cold-start current15A/115V 30A/230V |
Leakage current |
<0.5mA/240VAC |
Overload proctection |
105%-150%Type:Foldback:current limiting reset:auto recovery |
Over-voltage protection |
...... |
High-temperature protection |
...... |
Temperature coefficient |
±0.03%/°C(0-50°C) |
Setup rise hold up time |
200ms,100ms,30ms |
Vibration |
10-500HZ,2G 10min,/1cycle,Period for60min,Each axes |
Withstand voltage |
Input and output internal,1.5KVAC,Input and enclosure,1.5KVAC,Output and enclosure0.5KVAC |
Working temperature and humidity |
-10°C~+60°C(Refer to output derating curve),20%~90%RH |
Store temperature and humidity |
-20°C~+85°C.10%~95%RH |
Overall dimension |
129×98×38mm |
Weight |
0.4Kgs |
Safety standards |
Meet UL 1012 requirement(Not apply for the mark) |
Note:
1. The testing condition for the paramenter above is: 230VAC input, rated load, 2570% RH. Humidity.
2. Error. Include the setting error, line stability and load stability. (Note: 5).
3. Wave test: Adopting "A12"double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.
4. Inlet voltage stability test: When is over load, the lowest voltage of inlet is up to the highest voltage.
5. Load stability test: The load is from 0% to 100%.